FSM4000 ELECTROMAGNETIC FLOWMETER | DS/FSM4000-EN REV. L
Dimensions – flange device, aluminum sensor housing (shell housing)
2 3
7
7
7
40 (1 ½”)
6
1
50 (2”)
6
1
65 (2 ½”)
6
1
6
1
300
80 (3”)
6
1
200
100 (4”)
6
1
6
1
1 Other pressure ratings on request.
2) If an grounding plate is fitted (fastened to one side of the flange), dimension L increases as follows: by 3 mm (0.118 in) for DN 3 to 100, and by 5 mm
(0.197 in) for DN 125.
3) If protection plates are fitted (fastened to both sides of the flange), dimension L increases as follows: by 6 mm (0.236 in) for DN 3 to 100, and by 10 mm
(0.394 in) for DN 125.
4 Connection flange DN 10.
5 Connection flange ½”.
6 Connection dimensions in accordance with EN 1092-1. For DN 65, PN 16 in accordance with EN 1092-1 please order PN 40.
7 In devices with high temperature design, the dimensions F, F1 and F2 increase by +127 mm (+5.0 in).
To Next Page
Loading...
