ABB GOE Series - Hydraulic Tightening of Draw-Rod Nut

Installation and commissioning guide
2750 515-1 EN, REV. 14, 2020-06-26
49
10. Remove the bolts (6), washers (7) and lifting
tool (1).
G004679
11.
Remove the pull-through cord (12).
12.
Tighten the draw-rod nut, refer to Hydraulic tightening of the draw-rod nut, page 49, or Manual
tightening of the draw-rod nut, page 53.
End of instruction
4.8 Hydraulic tightening of the draw-rod nut
Overview
G005065
10 Draw rod nut
38 Hydraulic jack