ABB IRB 1200-7/0.7 - Page 401

NoteAction
xx2100001450
Insert two M4 screws to the pressed out holes
and press out the stainless shaft.
4
xx2100001451
Flange tightening tool:
3HAC079686-001
xx2100001452
Place the flange tightening tool together with a
3/8" (10 mm) socket spanner on the seal ring unit
and loosen the unit.
5
xx2100001453
Remove the gasket and seal ring unit.6
Replace the damaged parts with new ones.7
Continues on next page
Product manual - IRB 1200 401
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.4.3 Replacing the tubular spare parts
Continued