xx1600001036
Spare parts
When calibration is not being performed, a protective plug should always be
installed in the bushing. Replace damaged parts with new, if needed.
NoteArticle numberSpare part
Replace if damaged or missing.3HAC059556-001Protective plug for bushing
Used with protection type Clean
Room
3HAC059557-001Protective plug for bushing, Clean
Room
Used for robots with food grade
lubrication
Protective plug for bushing, food
grade lubrication
Used with protection type Hygien-
ic
Protective plug for bushing, Hygien-
ic
Replace if damaged or missing.
Product manual - IRB 1200 825
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
5 Calibration
5.4.3 Installation locations for the calibration tools
Continued
To Next Page
Loading...
