3 Maintenance
3.5.4. Rust preventive measures, support bearing in wrist (Foundry Prime)
3HAC022033-001 Revision: K230
© Copyright 2004-2011 ABB. All rights reserved.
3. Dismantle the air hose from motor axis 6.
4. Tighten the hose clamp on motor axis 6, and
remove the air hose.
5. Remove the cover.
xx0600002864
• A: Cover
6. Apply rust preventive on the bearing and cable
bracket with the brush.
See Location of bearing on page
229.
7. Refit the cover.
8. Perform a leakdown test. See Inspection of air hoses
(Foundry Prime) on page 191.
Action Note
Continued
To Next Page
Loading...
