ABB LVS Digital FC610 - Figure 34: Change the Hysteresis Value

CONFIGUR AT ION PAGES H MI MP53/MP 56
1TNC9 2825 0M0201 45
(U-IS: Voltage
Interruption
Supervision)
(FUNC: Function)
/
(Disable/Enable)
(THSH: Threshold)
95 %-100 %
(HYST: Hysteresis)
0 %-10 %
(PSS: Phase
Sequence
supervision)
(FUNC: Function)
/
(Disable/Enable)
The example below shows how to change the value from 1 % to 4 % of the “Hysteresis”
( ) under “Voltage Unbalance Supervision” ( ).
Figure 34: Change the hysteresis value