21 | © 2022 ABB | - 1SDH002203A1002
ABB | E-kit
Web interface configuration
Click on the chosen device to view its characteristics: the information will appear in the focus.
As shown in the figure below, the focus comprises three parts: the name of the device appears at the top,
the Info section on the left and the Channels section on the right. The following information is given in the
Info section:
1. Index of device;
2. Type;
3. Interface number;
4. Template;
5. Model;
6. Status of the device (not used, connected or disconnected - red);
7. Refresh time (only different from 0 if the device is connected), indicating how often it is interrogated.
Click on the Configuration button at the bottom of the focus. This will access the window below, where you
can configure the selected device in the following way:
To Next Page
Loading...
