Administrator rights are required to change the PC communication
setup. It is automatically detected that Tx signals from the IED are
received on the Tx pin on the PC. Thus, a straight (standard) Ethernet
cable can be used.
1. Select Search programs and files in the Start menu in Windows.
IEC13000057 V1 EN
Figure 4: Select: Search programs and files
2. Type View network connections and click on the View network connections
icon.
1MRK 511 360-UEN A Section 4
Starting up
Bay control REC670 2.1 IEC 45
Commissioning manual
To Next Page
Loading...
