A071166 V3 EN
Figure 68: Selecting setting group
3.
To browse the settings, scroll the list with and and to select a setting
press .
4.
To browse different function blocks, scroll the list with and and to select
a function block press
. To move back to the list, press .
The function block list is shown in the content area of the display. On the left
in the header, you see the current setting group, and on the right the menu path.
5.
To browse the parameters, scroll the list with and and to select a
parameter, press
.
The setting group values are indicated with #.
A070899 V3 EN
Figure 69: Setting group parameter
6.
To select a setting group value, press and to edit the value press .
A071168 V3 EN
Figure 70: Selecting setting group value
Only values within the selected setting group can be changed.
7.
Press or to change the value and to confirm the selection.
Section 8 1MRS756499 A
Commissioning
96 RED615
Operation Manual
To Next Page
Loading...
