A071152 V3 EN
Figure 54: Selecting active setting group
4. Commit the settings.
Remember to document the changes you make.
6.4.5.2 Copying a setting group
1.
Select Main menu/Copy setting group and press .
2.
Select the source and the destination with and .
3.
Set the group numbers with and .
4.
Press to confirm or to cancel.
If the destination group is the active one, these settings become valid.
6.4.5.3 Selecting a setting group for editing
1. Select Main Menu/Settings/Edit setting group.
2.
Select the setting group to be edited with
or .
3.
Press to confirm the selection.
4. Edit the settings.
A070858 V3 EN
Figure 55: Selecting a setting group
Section 6 1MRS756499 A
Operating procedures
74 RED615
Operation Manual
To Next Page
Loading...
