GUID-E6D25BB7-850E-4AD0-9C83-4A8D3CD0B1F4 V3 EN
Figure 5: Example view of the WHMI
The WHMI can be accessed:
• Locally by connecting your laptop to the IED via the front communication port.
• Remotely through the Internet or over LAN/WAN.
3.6.1 Command buttons
Command buttons can be used to edit parameters and control information via the
WHMI.
Table 12: Command buttons
Name
Description
Preventing automatic logout.
Enabling parameter editing.
Disabling parameter editing.
Writing parameters to the IED.
Refreshing parameter values.
Committing changes to IED's non-volatile flash memory.
Table continues on next page
1MRS756499 A Section 3
RED615 overview
RED615 25
Operation Manual
To Next Page
Loading...
