GUID-23EB9E90-97A9-480F-9DD3-998F594CCFFC V3 EN
Figure 31: Writing values to IED
The values are not stored to the flash memory.
2. Click Commit to write the values to the flash memory.
• Click Reject to cancel saving settings.
• If the parameter has an edit-copy, the original parameter value is
restored.
• If the parameter does not have an edit-copy, the edited parameter
value remains visible until you reboot the IED. However, the edited
1MRS756499 A Section 4
Using HMI locally or via web interface
RED615 49
Operation Manual
To Next Page
Loading...
