ABB REG670 2.0 IEC - Completing the Test; Exit Test Mode

12.16.1.2 Completing the test
Continue to test another function or end the test by changing the TestMode setting to
Off. Restore connections and settings to their original values, if they were changed for
testing purposes.
12.17 Exit test mode
The following procedure is used to return to normal operation.
1. Navigate to the test mode folder.
2. Change the On setting to Off. Press the 'E' key and the left arrow key.
3. Answer YES, press the 'E' key and exit the menus.
Section 12 1MRK502053-UEN B
Testing functionality by secondary injection
236 Generator protection REG670 2.0 IEC
Commissioning manual