ABB REG670 2.0 IEC - Editing Features in Graph

7.8 Editing features in graph
You can do the following operations on the graph during calibration, commissioning
and monitoring:
• Zoom in
• Zoom out
• Cancel zoom
• Enable X-zooming
• Enable Y-zooming
1. Zoom in one of the following ways:
• Right click a graph and select Zoom in or Zoom out in the shortcut menu.
IEC11000051-1-en.vsd
GUID-3F080E48-8B77-48A0-8283-89511E1AE50B V1 EN
Figure 27: Zooming via the shortcut menu
• Use the mouse to zoom in and select a part of the graph area.
IEC11000052-1-en.vsd
GUID-261171B2-59CD-4248-B873-39A2BC3CD1F1 V1 EN
Figure 28: Zooming via area selection of a part of the graph
• Press PgUp key on the keyboard to zoom in and PgDn to zoom out.
Section 7 1MRK502053-UEN B
Calibrating injection based 100% stator earth fault protection
82 Generator protection REG670 2.0 IEC
Commissioning manual