ABB REL670 - 19 Panel Mounting Details; 19 Panel Rack Mounting

22
Mounting methods and details Chapter 5
Installing the IED
3.3 19” panel rack mounting
3.3.1 19” panel mounting details
Figure 9: Panel mounting details. The flanges are interchangeable.
3.3.2 Mounting procedure for 19” panel mounting
Procedure
1. Carefully fasten the mounting angles to the sides of the IED.
Use the screws supplied in the mounting kit.
2. Place the IED assembly in the panel.
3. Fasten the mounting angles with appropriate screws.
PosNo Description
1a, 1b Two rack flanges, which can be mounted, either to the left or right side of the case.
2 Eight fastening screws.
xx04000452.vsd
1a
2
1b