ABB REL670 - Making the Electrical Connection

29
Making the electrical connection Chapter 5
Installing the IED
4 Making the electrical connection
Table 1: Designations for 1/2 x 19” casing with 1 TRM slot
Table 2: Designations for 3/4 x 19” casing with 1 TRM slot
Module Rear Positions
PSM X11
BIM, BOM or
IOM
X31 and X32 etc. to X51
and X52
GSM X51
SLM X301:A, B, C, D
LDCM X302:A, B
LDCM X303:A, B
OEM X311:A, B, C, D
LDCM X312:A, B
LDCM X313:A, B
TRM X401
Module Rear Positions
PSM X11
BIM, BOM, IOM or MIM X31 and X32 etc. to X101 and
X102
GSM X101
SLM X301:A, B, C, D
LDCM X302:A, B
LDCM X303:A, B
OEM X311:A, B, C, D
LDCM X312:A, B
LDCM X313:A, B
TRM X401