ABB Relion 620 Series - LD0.SPCRGGIO1 Multipurpose Binary Outputs (1); LD0.SRGAPC1 Multipurpose Binary Outputs - Flip-Flop Resets (1)

2.4.7.4 LD0.SPCRGGIO1 Multipurpose binary outputs (1)
The binary outputs can be configured either as pulse- or persistent-type outputs. Pulse-
type outputs are triggered with the write value "1". Persistent-type outputs can be
written with both values "1" and "0". The setting mode "toggled" for local
operation corresponds to "persistent" for remote operation.
Table 138: LD0.SPCRGGIO1 Multipurpose binary outputs (1)
IEC 61850 name SA name Description Type
LD0.SPCRGGIO1
.SPCS01.ctlVal - Output 1 control On/Off
.SPCS02.ctlVal - Output 2 control On/Off
.SPCS03.ctlVal - Output 3 control On/Off
.SPCS04.ctlVal - Output 4 control On/Off
.SPCS05.ctlVal - Output 5 control On/Off
.SPCS06.ctlVal - Output 6 control On/Off
.SPCS07.ctlVal - Output 7 control On/Off
.SPCS08.ctlVal - Output 8 control On/Off
.SPCS09.ctlVal - Output 9 control On/Off
.SPCS10.ctlVal - Output 10 control On/Off
.SPCS11.ctlVal - Output 11 control On/Off
.SPCS12.ctlVal - Output 12 control On/Off
.SPCS13.ctlVal - Output 13 control On/Off
.SPCS14.ctlVal - Output 14 control On/Off
.SPCS15.ctlVal - Output 15 control On/Off
.SPCS16.ctlVal - Output 16 control On/Off
2.4.7.5 LD0.SRGAPC1 Multipurpose binary outputs - flip-flop resets (1)
Table 139: LD0.SRGAPC1 Multipurpose binary outputs - flip-flop resets (1)
IEC 61850 name
SA name Description Type
LD0.SRGAPC1
.Rs1.ctlVal - Reset flip-flop 1 On
.Rs2.ctlVal - Reset flip-flop 2 On
.Rs3.ctlVal - Reset flip-flop 3 On
.Rs4.ctlVal - Reset flip-flop 4 On
.Rs5.ctlVal - Reset flip-flop 5 On
.Rs6.ctlVal - Reset flip-flop 6 On
.Rs7.ctlVal - Reset flip-flop 7 On
.Rs8.ctlVal - Reset flip-flop 8 On
1MRS757660 A Section 2
DNP3 data mappings
RET620 59
Point List Manual