ABB RER615 - Page 597

Name Type Values (Range) Unit Description
ZroSeq-A FLOAT32 0.00...40.00 xIn Measured zero
sequence current
I2_INST FLOAT32 0.00...40.00 xIn Negative se-
quence current
amplitude, in-
stantaneous val-
ue
I2_ANGL FLOAT32 -180.00...180.00 deg Negative se-
quence current
angle
I2_DB FLOAT32 0.00...40.00 xIn Negative se-
quence current
amplitude, re-
ported value
I2_RANGE Enum
0=normal
1=high
2=low
3=high-high
4=low-low
Negative se-
quence current
amplitude range
I1_INST FLOAT32 0.00...40.00 xIn Positive se-
quence current
amplitude, in-
stantaneous val-
ue
I1_ANGL FLOAT32 -180.00...180.00 deg Positive se-
quence current
angle
I1_DB FLOAT32 0.00...40.00 xIn Positive se-
quence current
amplitude, re-
ported value
I1_RANGE Enum
0=normal
1=high
2=low
3=high-high
4=low-low
Positive se-
quence current
amplitude range
I0_INST FLOAT32 0.00...40.00 xIn Zero sequence
current ampli-
tude, instantane-
ous value
I0_ANGL FLOAT32 -180.00...180.00 deg Zero sequence
current angle
Table continues on the next page
1MRS758755 C Measurement functions
REC615 & RER615
Technical Manual
597