ABB | SACE Emax 2
Accessories | 1 - Introduction47 | © 2019 ABB | 1SDH001316R1002 - ECN000086501 - Rev. A
Accessories
1 - Introduction
Overview and connection
Emax 2 circuit-breakers have a set of electrical and mechanical accessories, the availability of which depends
on the CB model.
The main electronic accessories, always present with Ekip Touch, are described below:
For a complete overview of all the other accessories, consult document 1SDH001330R1002.
For a description of the connection, the assembly instructions for each accessory and the circuit diagrams of
the circuit-breaker, consult document 1SDM000091R0001.
2 - Rating Plug
Description
The Rating Plug, supplied with Ekip Touch, establishes the rated current In required by the measuring range
and sets the current protections (with reference to In).
It is installed on a dedicated front connector and is accessible to the user for inspections or replacement
following a change of model/size.
For further details about the available models, operations and reference documents, consult document
1SDH001330R1002.
To Next Page
Loading...
