ABB SACE Emax E4.2 - Mechanical Safety Accessories; KLC: Open Position Key Lock; PLC: Padlock; Anti-Racking-In Lock

ABB | SACE Emax 2
238 | © 2013 ABB | 1SDH001000R0002 - L7804
Mechanical accessories | 2 - Mechanical safety accessories
2 - Mechanical safety accessories
KLC: open position key lock
The KLC lock locks the circuit-breaker in the open position.
It can also be used during maintenance activities on the circuit-breaker after removal of the
guard accessory.
The KLC lock is available with two types of locking:
• lock with different key code numbers (for an individual circuit-breaker).
• lock with the same key code number (for more than one circuit-breaker). The maximum
number of key code numbers available is five.
If set up appropriately, the KLC-A lock can work with four other types of locks:
• Ronis
• Profalux
• Kirk
• Castell
NOTE: The supply of Ronis - Profalux - Kirk - Castell locks is at customer's expense.
Information on assembly is available at the web site http://www.abb.com/abblibrary/
DownloadCenter/, in particular with the sheets kit:
• 1SDH001000R0702 1SDH001000R0703 for key locks with lock supplied by ABB;
• 1SDH001000R0703 for the key locks with pre-engineering for Ronis - Profalux - Kirk locks;
• 1SDH001000R0718 for the key locks with pre-engineering for Castell locks;
PLC: padlock
The PLC padlock locks the circuit-breaker in the open position.
It is available in two types:
• lock usable with a maximum number of three padlocks with a diameter of 4 mm.
• lock usable with a maximum number of two padlocks with a diameter of 8 mm.
• lock for a padlock with a diameter of 7 mm. or for a latch chain
NOTE: The padlocks are at the expense of the customer.
Information on the assembly is available from the web site http://www.abb.com/abblibrary/
DownloadCenter/, in particular with the kit sheet 1SDH001000R0706.
Anti-racking-in lock
E
2
.
2
N
-
B-
S
E
2
.
2
H
0
2
0
8
1
0
1
2
1
6
2
0
2
5
0
8
1
0
1
2
1
6
20
2
5
LEFT
M
A
T
C
H
A
L
S
O
T
H
E
RI
G
H
T
S
I
D
E
The anti-racking-in lock allows the moving part of the circuit-breaker to be inserted only into
the corresponding fixed part.
It is intended for all withdrawable circuit breakers.
Information on the assembly is available from the web site http://www.abb.com/abblibrary/
DownloadCenter/, in particular with the kit sheet 1SDH001000R0701.
MOC: Operation counter
00001
The mechanical operation counter displays the number of mechanical operations performed
by the circuit-breaker.
Information on the assembly is available from the web site http://www.abb.com/abblibrary/
DownloadCenter/, in particular with the kit sheet 1SDH001000R0710.