ABB SACE PR112 - 4.1 Operation mode menu tree; SACE PR122;P protection release

ABB SACE SACE PR010/T RH0029002 L2551 13/67
67
4.1 Operation mode menu tree
1° 2° 3° 4° 5° 6° 7° 8° 9°
1. Operation mode
Select DUT (PR222DS)
1. Test
1. Protections 1. Automatic Start test
(select Electronic Set)
Create
test
report
2. Manual 1. Default
setting
Start test
2. User setting
Set
parameters
Start test
2. Trip
Start test
2. Reading
1. Currents Read currents
2. Last trip.
Display tripping parameters
3. Config./param.
1. DUT
config.
Display DUT configuration parameters
2. DUT
parameters
1. Manual
parameters
Display manual set parameters
2. Electronic
parameters
Display electronic set parameters
3. Default
parameters
1. For test Display default test parameters
2. Operative
Display default operative parameters
4. Communication
par.
Display communication parameters for system bus
5. Information
Read release identification, SW version and Serial Number
3. Programming
1.Parameters Change DUT protection parameters Store protection
unit parameters
2. Default
download
Program DUT with default operative parameters
defined in "programming/Define/Manual/Default set"
3. Default
definition
1. Only for
test
Define default par. used for: "Test/
Protections/Manual/Default set"
Store
parameters in
the PR010/T
test unit
2. Operative Define default par. for: "Program/Default
download"
4.Communication
par.
Define communication par. for system bus Store
parameters in
the PR010/T
test unit