ABB SACE SACE PR010/T RH0029002 L2551 18/67
67
In this example, all the protection functions implemented by the SACE PR212/MP release are
tested automatically:
6. SACE PR223EF
protection release
1. Set the PR222MP in electronic set
mode
(ELT)
2. From the main menu select 1 (Operation
mode)
3. Select the PR222MP unit with x (PR222MP)
4. Select the type of activity with 1 (Test)
5. Select the type of test with 1 (Protections)
6. Select the test mode with 1 (Automatic)
7. Pressing ENTER enables a simulation of the failure for
each protection function
To Next Page
Loading...
