ABB SACE Tmax XT7 - Page 38

ABB | SACE Tmax XT
36 | © 2020 ABB | 1SDH001821A1002 - ECN000135670 Ekip Touch - Interface and menus | 4 - Menu
Measurements Menu
Menu Submenus Description Page
Historicals
Trip Description in dedicated chapter 110
Events List of events recorded 110
Measurements
List and description in dedicated
chapter
110
Power factor
(1)
- Power factor measurement 113
Frequency
(1)
- Frequency measured 113
Energy
(1)
Energy counters Measurement of energies
113
Reset counters Meter reset command
Energy RESET
List and description in dedicated
chapter
113
Peak factor
(1)
- Peak factor of each phase 113
Harmonic dist. -
Activation command for current
harmonic distortion monitoring
52
Ekip
Synchrocheck
(2)
- Description in dedicated chapter 178
Network
Analyzer
(3)
V Sequences
Measurements associated with
Network Analyzer function: list and
description in dedicated chapter
119
3s V Sequences
THD Current
THD Voltages
Counters
Waveforms
Maintenance
Contact Wear
Installation and maintenance dates
and commands
129
LastServiceContactWear
Installation
Last Maintenance
Service RESET
(1)
available if provided for by Trip unit model or if SW Measuring Measurements package has been activated
(2)
available when Ekip Synchrocheck module is present
(3)
available if provided for by Trip unit model or if Network Analyzer SW package has been activated