42 S4 D184B122U02
Application Spectrum
• Configuration and setting parameters in field instruments.
• Diagnosis of instruments, access status messages.
• Visual overview of the instruments connected to the system using a picture of the connections.
• Storage/management of instrument data.
• Instrument measurement site planning and management
• Online display of instrument data (measurement values, diagnostics, configuration/parameter and sta-
tus information) in multi visual form.
PC-/ Notebook Requirements
Minimum Requirements
– Intel-Pentium II Processor 233 MHz or compatible
– 64 MB RAM memory
– 50 MB free hard drive capacity
– Microsoft Windows 95, NT 4.0 with Service Pack 5
– Internet Explorer 5.0
Recommended Components
– Intel-Pentium III-Processor 450 MHz or compatible
– 128 MB RAM memory
– 50 MB free hard drive capacity
– Windows NT 4.0 with Service Pack 5 or 6a
– Internet Explorer 5
Functionality/Special Features
Management
– Management of instruments and networks in projects.
– Defining projects using the graphic interactive project editor.
– Assignment of meter location names in the project editor.
– Automatic assignment of meter location names/instrument addresses and multiplexer channels.
– Instrument selection/access by simply clicking the instrument in the project.
– Instrument recognition using the instrument tag number or address.
– Simultaneous communication with multiple field instruments.
– Scan a Contrans I-Bus connection for connected HART-instruments.
Information!
The complete SMART VISION program version is available for a 90 day free evaluation without a license.
This also applies to all DTM‘s. When this time period, beginning at start-up, has expired and a license has
not been obtained, the software will no longer be functional.
To Next Page
Loading...
