ABB Symphony Harmony Series - Page 388

Procedure
WBPEEUI240751C0 PR8 - 3
□
6. Verify 1.6 A, 250 V fuses are present in both the A and B
channel block power fuse holders on the I/O module.
□
7. Verify a 3.15 A, 250 V fuse is present in the field power fuse
holder.
□
8. If installing redundant I/O modules, insure the settings for
both I/O modules are the same.
Single-ended high
level voltage
RFP
Thermocouple RFP
NOTE:
1. n corresponds to the channel number from 1 to 16. For example, 1-J1
and 1-J2 configure channel one.
Table PR8-3. Input C hannel Jumpers (continued)
Input
Field
Power
n
1
-J1 n
1
-J2
321 321
321 321