Operation Manual / TPL65VA32/33
Page 35
© Copyright 2015 ABB. All rights reserved.
September 2015 HZTL2464_EN Revision C
3.1
A carefully designed and installed oil supply, which functions in all
possible operational conditions, is an important prerequisite for trouble-
free turbocharger operation.
The turbocharger is normally lubricated with oil from the engine oil circuit.
With regard to the oil supply, please observe the engine builder's
specifications for lubricating oil selection, oil change intervals, oil
filtration, oil pressure and oil temperature.
A lubricating oil filter system with a filter mesh size of ≤ 0.034 mm is
adequate for this turbocharger.
To Next Page
Loading...
