ABB TPL65VA33 - Emergency Operation TPL..VA

Operation Manual / TPL65VA32/33
Operation
4
Emergency operation TPL..VA
4.5
Page 52
© Copyright 2015 ABB. All rights reserved.
September 2015 HZTL2464_EN Revision C
Emergency operation TPL..VA
4.5
In the event of failure of the control system or the drive, the variable
turbine geometry module can be fixed by clamping the ring lever (B) using
at least 3 washers (C) spaced around the circumference.
When fixing, the position of the variable turbine geometry module and / or
the blades must be specified by the enginebuilder.
4.5
Detail A