Operation Manual / TPS48-D/E.. - TPS61-D/E..
Safe operation and maintenance
Page 24
April 2015 HZTL2410_EN Revision D
Safety during disassembly, assembly, maintenance and troubleshooting
Always perform the specified adjustments, servicing as well as
inspection work and observe inspection intervals.
Inform operating personnel about all service and repair work before
beginning.
Before opening a cover or removing a protective device on a
turbocharger, the engine must be switched off and the turbocharger
must have come to a standstill.
Ensure that the supply of oil is interrupted, especially with an external
oil supply.
Put the engine into operation only after all parts have been refitted
properly.
Mechanical work on the turbocharger
Possible damage to or destruction of components on the turbocharger.
Perform only those tasks that are described in this manual.
Perform work only for which training has been carried out.
Safety when taking out of operation or mothballing
Secure the rotor so it cannot turn. The rotor can turn on its own from
the force of the stack draught.
Clean the turbocharger before mothballing it.
Wear appropriate protective clothing.
© Copyright 2015 ABB. All rights reserved.
To Next Page
Loading...
