ABB TPS48 Series - Warning Plates and General Safety Practices

Operation Manual / TPS48-D/E.. - TPS61-D/E..
Safety
2
Warning plates on the turbocharger
2.5
Page 21
© Copyright 2016 ABB. All rights reserved.
September 2016 HZTL2410_EN Revision E
Warning plates on the turbocharger
2.5
Warning plates are attached to the turbocharger at the following places:
If warning plates are not present at the intended places or are not legible,
then proceed as follows:
 Order new warning plates from ABB Turbocharging Service Stations.
 Remove unreadable warning plates.
 Clean and degrease surfaces provided for warning plates.
 Attach new warning plates.
Uninsulated turbochargers
When uninsulated turbochargers are delivered to the engine builder, the
warning plates must be subsequently attached to the insulation. This is
the responsibility of the engine builder.
2.5