Operation Manual / TPS48-D/E.. - TPS61-D/E..
Hazards during operation and
maintenance
Page 29
© Copyright 2016 ABB. All rights reserved.
September 2016 HZTL2410_EN Revision E
Hazards when handling insulating materials
Hazards due to insulating materials
Dust and fibres from insulating materials can cause damage to health
or irritations. Unsuitable, combustible insulating materials signify a fire
hazard.
Use only suitable, non-combustible insulating materials.
Ensure that the work area is well ventilated.
Avoid stirring up dust.
Use tools and processes which keep dust to a minimum.
Remove packing materials only in the work area.
Take particular care when removing old insulating materials.
Dispose of insulating materials properly and in an environmentally
compatible way in accordance with applicable local regulations.
Wear safety goggles.
Wear a respiratory mask to protect against dusts.
Wear safety gloves to protect against chemical hazards.
Use only suitable, non-combustible insulating materials.
Ensure that the work area is well ventilated.
Wear suitable work clothing (safety glasses, respiratory mask).
Avoid stirring up dust.
Use tools and processes which keep dust to a minimum.
Remove packing materials only in the work area.
Take particular care when removing old insulating materials.
Dispose of insulating materials properly and in an environmentally
compatible way in accordance with applicable local regulations.
To Next Page
Loading...
Need help?
General
