Operation Manual / A100-L
9 Disassembly and assembly / 9.22 Fitting the filter silencer
© Copyright 2021 ABB. All rights reserved. HZTL4034_EN Rev.T December 2021
9.22 Fitting the filter silencer
9.22.1 Design variants
The turbocharger is equipped with one of the following filter silencer variants:
¡ Welded filter silencer
¡ Cast filter silencer
The filter silencers differ in terms of the fixing eyelets for the lifting gear. The relevant vari-
ant must be taken into consideration for disassembly and assembly.
Page 100 / 141
To Next Page
Loading...
Need help?
General
