ABB Zenith ZTX Series - 5.1 Using Ekip Connect -software

38
1
Zenith ZTX Series ATS, OPERATION, MAINTENANCE, AND INSTALLATION GUIDE
—
5.1 Using Ekip Connect -software
Ekip Connect is a free software for com-
munication and testing of ABB automatic
transfer switches. The software is com-
patible with ZTX 30-1200 A, 200-480
Vac automatic transfer switches. It can be
installed on PCs equipped with the Micro-
soft Windows® operating system. To
download it, see the address below:
http://www.abb.com/abblibrary/
DownloadCenter/
—
Fig. 5.2 Ekip Connect -software
With its communication function, it allows
you to:
• Monitor the state of the automatic
transfer switches connected and record
information.
• Configure the automatic transfer
switches with customized parameters.
• Create communication reports.
• Reset configurations.
Further information on the Ekip Connect
application is available from the web site,
see the address below, particularly the
manual 1SDH000891R0002.