Abbott FreeStyle LibrePro - Starting the Sensor

Starting the Sensor
Step
Action
1
Press the Home Button to turn on the Reader.
2
Touch Start New Sensor.
3
Hold the Reader within 1.5 inches (4 cm) of the
Sensor to start it. If sounds are turned on, the
Reader beeps when the Sensor has been started.
You can check the Sensor has successfully started
in 2 minutes.
Note: If communication is not established within
15 seconds, the Reader displays a prompt to try
again. Touch OK to return to the Home Screen
and touch Start New Sensor to start the Sensor.
10:23pm
Start New
Sensor
Get Sensor
Data
Check Sensor status
when prompted in:
minutes
OK
Sensor Starting
2
19