Problems Getting Sensor Data
Display What It May Mean What To Do
Data Transfer
Error
The Reader is not
held close enough
or long enough to
the Sensor.
Hold the Reader within
1.5 inches (4 cm) of the
Sensor for up to 5 seconds.
New Sensor
Found
The Sensor was
never started.
If you would like to begin
using this Sensor, touch Yes.
Communication
Error
The Reader
was unable to
communicate with
the Sensor.
Hold the Reader within
1.5 inches (4 cm) of the
Sensor.
Note: You may need to
move away from potential
sources of electromagnetic
interference.
34
To Next Page
Loading...
