Charging the Reader
A fully charged Reader battery should last up to 2 weeks. The battery life
may vary depending on your usage.
Plug the included USB cable into an electrical
outlet using the included power adapter. Then,
plug the other end of the USB cable into the USB
port on the Reader.
Charging
CAUTION: Be sure to select a location for
charging that allows the power adapter to be
easily unplugged.
Notes:
• You must charge the Reader when the battery is low to
keep using the Reader.
• To fully charge the battery, charge the Reader for at least
3 hours.
• Only use the USB cable and power adapter included with
the system.
• Fully charge the Reader before storing it for more than
3 months.
26
To Next Page
Loading...
