Getting Sensor Data
Data can be downloaded at anytime from Sensors that are on or o
the body.
Step Action
1
Press the Home Button to turn on the Reader.
2
Touch Get Sensor Data.
3
Hold the Reader within 1.5 inches (4 cm) of the
Sensor. If sounds are turned on, the Reader will
beep when all the data has been successfully
downloaded from the Sensor. This may take up
to 5 seconds.
Note: If communication is not established within
15 seconds, the Reader displays a prompt to try
again. Touch OK to return to the Home Screen
and touch Get Sensor Data again.
To Next Page
Loading...
