• Take standard precautions for transmission of blood borne pathogens
to avoid contamination.
• The Reader should be cleaned between patients.
• If a Sensor breaks inside a patient, remove with tweezers, treat any
medical complications and call Customer Service.
• Use of the System is not recommended in the critically ill population
since performance is unknown due to dierent conditions and
medications.
• Sensor placement is not approved for sites other than the back of the
arm. If placed in other areas, the Sensor may not function properly.
• If the Sensor Kit package or contents or the Reader appear to be
damaged, do not use as there may be a risk of electric shock, no results,
and/or infection.
• Store the Sensor Kit between 39°F-77°F. While you don’t need to keep
the Sensor Kit in a refrigerator, you can as long as the refrigerator is
between 39°F-77°F.
• Store the Sensor Kit between 10-90% non-condensing humidity.
• The System does not provide real-time results. Patients need to rely on
blood glucose readings for monitoring glucose during System use.
• Clean hands prior to Sensor handling/insertion to help prevent
infection.
• Clean the application site and ensure that it is dry prior to Sensor
insertion. This helps the Sensor stay attached to the body.
5
To Next Page
Loading...
