ID NOW Instrument User Manual 41
Caution: Saved data should be archived regularly to prevent loss. See
Section 9.4, Export Results.
Test Results
User ID: Abbottuser1
1/Jan/2014
11:22am
Procedural
Control Valid
Flu A: Negative
Flu B: Positive
PrintNew Test
10AX425
Example of a Test Result, viewed in the instrument
memory.
User ID: Abbottuser1
1/Jan/2013
11:22am
Procedural
Control Valid
Flu A: Negative
Flu B: Positive
ActionsBack
Test Results
10AX425
When Connectivity has been configured, the
connectivity status of each result is displayed on the
Test Results screen:
• Not Sent
• Queued for sending (as Not Sent, but
Auto-Sending is enabled, which will
eventually send the record)
• Connecting…
• Sending…
• Failed to send
• Failed to send, retrying…
• Sent (followed by the send date and time)
No Results Saved
Patient Test Results
OK
No results saved.
This screen will be displayed if the instrument has not
yet been used for patient testing or following export
and deletion of all results.
Invalid Test Results
Flu A: Invalid
Flu B: Invalid
PrintNew Test
User ID: Abbottuser1
1/Jan/2014
11:22am
Procedural
Control Valid
10AX425
If a test completes but the instrument failed to
determine a result, the test will display an Invalid
message for that result and will archive it in the
instrument memory.
This example shows an Influenza A & B Invalid test
result. Refer to the relevant Package Insert for further
details.
To Next Page
Loading...
