8-7
Questions? Refer to Page 10-9 For Technical Support Instructions.
What You See on the Display What You Do Comments
Review Test Setup for Control Test
Chapter 8: Review Setup
1. Press 1 for Test Setup.
2. Press 4 for Control Test to continue to the
Control Test Levels screen.
3. P r e s s 1-Next to continue to the
Control Test Result screen.
4. P r e s s 1-Next to continue to the
Control Test Comment Code If
In-Range screen.
5. P r e s s 1-Next to continue to the
Control Test Comment Code If
Out-of-Range screen.
6. P r e s s 1-Next to return to the
Test Setup menu.
Note: This section illustrates some representative settings.
If the monitor does not display these screens, please refer to Chapter 10, Troubleshooting.
To Next Page
Loading...
Need help?
General
