3-24 Chapter 3
" Max Saving
When the three saving modes are enabled, the system is set up for
maximum power savings.
Doze = 1 minute
Standby = 1 minute
Suspend = 1 minute
" Disable
Disable the power management function.
PM Control by APM:
Power Management is completely controlled by the APM.
APM stands for Advanced Power Management, it is a power management
standard set by Microsoft, Intel and other major manufacturers.
Video Off Method:
Three video off methods are available: "Blank Screen", "V/H SYNC +
Blank" and "DPMS". The default is "V/H SYNC + Blank".
If this setting does not shut off the screen, select “Blank Screen”. If your
monitor and video card support DMPS standard, select “DPMS”.
Video Off After:
Select the saving mode in which the video is switched off.
" NA
The video will never be switched off in no power saving mode.
" Suspend
The video will only be switched off in Suspend mode.
" Standby
The video will only be switched off in Standby or Suspend mode.
" Doze
The video will be switched off in all power saving modes.
CPU Fan Off Option:
CPU fan can be turned off in suspend mode.
Modem Use IRQ:
You can specify the IRQ for modem use.
To Next Page
Loading...
