Introduction of BIOS 3-31
(8)Integrated Peripherals
In this menu, you can change the onboard I/O device, I/O port address and other
hardware settings.
Figure 3-8. Integrated Peripherals Menu
Onboard IDE-1 Controller:
The onboard IDE 1 controller can be set as Enabled or Disabled.
#
##
#
Master Drive PIO Mode:
"
""
"
Auto: The BIOS can auto-detect the transfer mode of the IDE devices
in order to set its data transfer rate. (Default)
You can select the PIO mode from 0 to 4 of the IDE devices in order to
set its data transfer rate.
#
##
#
Slave Drive PIO Mode:
"
""
"
Auto: The BIOS can auto-detect the transfer mode of the IDE devices
in order to set its data transfer rate. (Default)
You can select the PIO mode from 0 to 4 of the IDE devices in order to
set its data transfer rate.
To Next Page
