Abit BH6 - Page 52

3-32 Chapter 3
#
##
# Master Drive Ultra DMA:
Ultra DMA is a DMA data transfer protocol that utilizes ATA commands
and the ATA bus to allow DMA commands to transfer data at a maximum
burst rate of 33 MB/sec.
"Auto: When you select
Auto
, the system automatically determines
the optimal data transfer rate for each IDE device. (Default)
"Disabled: If you encounter the problem of using Ultra DMA devices,
you can try to
Disable
this item.
# Slave Drive Ultra DMA:
"Auto: When you select
Auto
, the system automatically determines
the optimal data transfer rate for each IDE device. (Default)
"Disabled: If you encounter the problem of using Ultra DMA devices,
you can try to
Disable
this item.
Onboard IDE-2 Controller:
The onboard IDE-2 controller can be set at Enabled or Disabled.
#
##
# Master Drive PIO Mode:
"Auto: The BIOS can auto-detect the transfer mode of the IDE devices
in order to set its data transfer rate. (Default)
You can select the PIO mode from 0 to 4 of the IDE devices in order to set its
data transfer rate.
#
##
# Slave Drive PIO Mode:
"Auto: The BIOS can auto-detect the transfer mode of the IDE devices
in order to set its data transfer rate. (Default)
You can select the PIO mode from 0 to 4 of the IDE devices in order to set its
data transfer rate.
#
##
# Master Drive Ultra DMA:
Ultra DMA is a DMA data transfer protocol that utilizes ATA commands
and the ATA bus to allow DMA commands to transfer data at a maximum
burst rate of 33 MB/sec.
"Auto: When you select
Auto
, the system automatically determines
the optimal data transfer rate for each IDE device. (Default)
"Disabled: If you encounter a problem using Ultra DMA devices, you
can try to
Disable
this item.