C-4 Appendix C
before you update your BIOS. If the above mentioned problem
occurs during BIOS update you will be able to use this disk to
automatically execute a BIOS updating. The content of the disk
should be the following:
a. Startup system files (COMMAND.COM, MSDOS.SYS,
IO.SYS...)
b. AWDFLSH.EXE
c. The NEWBIOS file which can be downloaded from ABIT’s
website.
d.
AUTOEXEC.BAT, which has the following content:
A:\AWDFLASH NEWBIOS /PY /SN /CC
For example, to update the IT6B BIOS version to FZ
(it6b_fz.bin), you need to type:
A:\AWDFLASH IT6B_FZ.bin /PY /SN /CC /CD
&
If you try to flash a version of BIOS that is for the incorrect
motherboard model the following message will appear:
“
The program file’s part number does not match with your
system!
”
To Next Page
Loading...
