D-4 Appendix D
6. Information: Click ‘OK’
After previous instructions have been followed, the driver will automatically
install. It will automatically restart the computer after it has finished
installing.
7. When you restart your Windows
®
95, just follow the step shows on the
screens. After you see the screen below, please set the path to
C:\WINDOWS\SYSTEM\IOSUBSYS then finish the following steps. You
will need to restart Windows, then Windows will find several I/O devices,
when finished with this procedure, you will need to restart Windows
®
95 yet
again. This will fully complete the installation of the IDE Bus Master drivers.
To Next Page
Loading...
