Abit BH6 - Page 94

G-4 Appendix G
5
*
. OS/APPLICATION:
Indicate what are the operating system and the
applications your are running on the system.
Example: MS-DOS
®
6.22, Windows
®
95, Windows
®
NT....
6
*
. CPU:
Indicate the brand and the speed (MHz) of your CPU.
Example: (A) In the “Brand” space, write “Intel”, in the
“Specifications” space, write “ Pentium
®
II MMX 233MHz”
7. HDD:
Indicate the brand and specifications of your HDD(s), specify if
the HDD is using .IDE1 or .IDE2. If you know the disk capacity,
indicate it and check (“/”) “ ”; in case you give no indication, we will
consider that your HDD is “0IDE1” Master.
Example: In the “HDD” space, check the box, in the Brand space, write
“Seagate”, in the Specifications space, write “ST31621A (1.6GB)”.
8. CD-ROM Drive:
Indicate the brand and specifications of your CD-
ROM drive, specify if it uses . IDE1 or .IDE2, and check (“/”) “ ”;
in case you give no indication, we will consider that your CD-ROM is
“0IDE2” Master.
Example: In the “CD-ROM drive” space, check the box, in the Brand
space, write “Mitsumi”, in the Specifications space, write
“FX-400D”.