IMPORTANT INFORMATION
1
Important information
Preface
This manual describes the mechanical and electrical installation of the ABL Wallbox.
The working steps described in this manual must only be carried out by qualified spe-
cialist personnel (mechanical installation) and qualified specialist electrical contractors
(electrical installation), who, on the basis of their specialist training, knowledge and
experience as well as their knowledge of the relevant regulations, can assess and
carry out the working steps described in this installation manual and recognize poten-
tial hazards.
The ABL Wallbox model variants can be identified by the ABL model number on the
product label located on the internal electronic components cover. Always make sure
before installation that your model variant is the one described in this installation man-
ual!
About this manual
This manual is included with the ABL Wallbox and documents the steps and settings
required for installing the wallbox, taking it into operation as well as for resolving
malfunctions during operation. For quick and easy reference, certain sections of this
manual are specially formatted.
• Descriptions listing equally valid options (as is the case here) are indicated by bullet
points.
• Descriptions that describe performing a function are shown in the form of numerical
lists indicating the order of the individual working steps.
Please make sure you read this manual carefully and ensure in particular that you fol-
low all safety notices given in this manual.
All measurements in this manual are in millimeters. Where necessary, the scale is
indicated for different illustrations.
Please note that all technical details, specifications and design characteristics of the
product may be changed without prior notice.
Safety notices in this manual
In particular, the warnings and safety measures in this manual that are marked as fol-
lows must be adhered to. The symbols carry the following meanings:
To Next Page
Loading...
Need help?
General
