Ableton Push 3 User Manual

Melodic Sequencer.
When using the Melodic Sequencer, you can place notes on all eight
rows of pads. You can adjust the loop length and access additional step
sequencing options via the loop length controls.
When the In Key scale option is selected, each row of pads
corresponds to one of the available pitches in the set key. When the
Chromatic scale option is selected, notes that are in the key are lit,
while notes that are not in the key are unlit. The root note of the key is
accessible on the white row of pads at the bottom of the grid.
Each column of pads represents a step in the resolution set by the
Scenes buttons.
7/29/23, 9:32 AM
Page 101 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)