Ableton Push 3 User Manual

you press and hold, the button will turn off when released, allowing for
momentary control of repeated notes.
You can use the Swing and Tempo encoder to control the amount of
swing applied to the repeated notes. Tap the encoder to check if Swing
is selected or to check the current amount of swing applied. If
necessary, press the encoder to switch from Tempo to Swing, then turn
the encoder to adjust the swing amount.
Adjusting the Swing Amount.
8.4 Capturing MIDI Clips
In addition to recording MIDI, you can also play pads in real time and
then press the Capture button to save the notes you’ve just played on
7/29/23, 9:32 AM
Page 120 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)