Ableton Push 3 - Choosing the Correct Audio Input

10.1.2 Choosing the Input for a Track
To select the input channel for your track, press the Mix button.
The Mix Button.
Two modes can be accessed via the Mix button. The first is the Global
Mix Mode. This shows the volume, pan, and return send settings for
each track.
Global Mix Mode.
Press the Mix button again to view Track Mix Mode, which displays the
monitoring and input/output settings for the selected track. You can
press the display button above Input & Output to select an input type
and channel.
7/29/23, 9:32 AM
Page 138 of 193