Ableton Push 3 User Manual

Simpler instrument, which contains detailed but easy-to-use sample
parameters accessible in three different modes.
Navigate to Browse Mode to add an empty Simpler instrument to a MIDI
track.
An Empty Simpler Device.
You can enter Hot-Swap Mode to browse the available Simpler presets
and samples from the Core Library. To view all of your samples,
including ones from Packs, navigate to the Samples folder in the Device
category.
The Samples Folder.
Once you have selected and loaded a sample from Hot-Swap Mode,
you will be taken back to the Device View. Here you will see the
sample’s waveform in the display, along with a number of parameters
that allow you to quickly adjust how the sample plays back. This is the
main bank of Simpler’s controls.
7/29/23, 9:32 AM
Page 148 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)